RPCS3 - Compatibility List. History of the updates made to the compatibility list. Compatibility List History. Compatibility List Builds History. You're now watching the updates that altered a game's status for RPCS3's Compatibility List since July 1st, 2021. For dumping digital games, you must copy the game folder from devhdd0/game/GameID on your console over to the same path on your RPCS3 folder. You also need to get your console's IDPS, the game's RIF and ACT.DAT, in order to generate a.RAP license file to be used in the emulator.
I would like to note right away that patches for the RPCS3 emulator are not a pure panacea. The RPCS3 developers use them more as stubs for problems, solutions to which, for one reason or another, have not yet been found. Nevertheless, these “stubs” can often bring a rather noticeable increase in emulation performance, or even allow you to start a game that has not been launched before, or that crashed with errors.
This material is made in order not to constantly describe the routine and monotonous method of installing a patch in future guides, but simply refer to this note.
The entry is over. Let’s go directly to installing the patch:
Update September 15, 2020:
Since the version of the emulator RPCS3 v0.0.12-10891-6540393d Alpha | HEAD, installing patches is straightforward. In order to download new patches, you need to do the following: Start the emulator, go to the “Manage” menu, then select the “Game Patches” sub-item in it:
Next, click on the “Download latest patches” button located at the very bottom of the window:
And if you did everything correctly, then you will receive a similar message below:
This means that everything went fine. The patches have been downloaded and you can proceed to their application.
In addition, if you are lost in the abundance of the presented fixes, then just check the box next to the “Only shows owned games” parameter and the program will limit the demonstration of patches only to the games available (installed on your emulator) to you:
The old way:
Patch 1.2 testing was carried out on the version of the RPCS3 emulator v0.0.11-10694-609182b1 Alpha. This is a very important detail, because for both old and newer RPCS3 releases, version 1.2 of the patch may not work.
Rpcs3 Games Running Slow
Take this into account, and do not forget that the emulator developers update their program code quite often. If the patch below does not work with your version of the emulator (provided that your RPCS3 release is newer than the one listed above) – write about it in the comments to this material and I will definitely update this guide.
You can download patch 1.2 from the link below:
Update September 5, 2020. A new version of patch 1.3 is available:
After downloading, you need to unpack the archive and copy the resulting file to the “patches” folder located on the following path: “Emulator RPCS3 patches”
Next, you need to start the emulator and go to the “Manage” => “Game Patches” tab:
Rpcs3 Games Not Showing Up
Next, you need to find out the BCES / BLES code and the version of your game and select it in the “Patch Manager” window that opens:
If you did everything correctly, now you have the opportunity to further customize and optimize the games The Last of Us, Uncharted: Drake’s Fortune, Uncharted 2: Among Thieves, Uncharted 3: Drake’s Deception, as well as many other games! For example, in the “Game Patches” section, you can remove frame rate restrictions for projects such as NieR Replicant and Demon’s Souls.
In the following articles, I will try to briefly describe the patch settings for The Last of Us and the Uncharted series. Stay with us!
Rpcs3 Games Iso
Download and Install RPCS3
Visit RPCS3’s official site and download the emulator to your hard disk drive. RPCS3 is available for Windows and Linux. We will be setting it up in Windows, but the process is more or less the same for all supported OS.
The Windows version is available as a ZIP archive. Extract the downloaded archive. RPCS3 doesn’t need installation, so you can run it directly by double-clicking on the rpcs3.exe file.
Initial Setup
Run the emulator, and if you wish, as it suggests in the pop-up window that appears, check out its Quickstart guide at its official site to learn how to use it.
RPCS3 periodically exchanges information with its official site, like updated compatibility data for the games it supports. If you are behind a firewall, you should grant access to RPCS3 to allow it to update its data without having to do it yourself manually.
RPCS3 emulates the PlayStation 3’s hardware but not its software. For that part of the equation, you will have to download the original firmware that you would use on an actual console to update it.
To do this, visit the official PlayStation site and click on “Help” on the top-left menu. Choose “System Software” from the options that appear.
The PlayStation site offers firmware for the whole family of consoles in the PlayStation family that are still supported. Choose “PS3.”
Scroll down the “PS3 System Software Update” page and click on “Agree and Download Now” to download the file.
Return to RPCS3. Choose “File -> Install Firmware.”
Select the firmware you’ve downloaded from PlayStation’s site and wait a while for RPCS3 to install the necessary files.
RPCS3 will inform you when the process completes successfully.
You’ll have to wait a bit more while RPCS3 pre-compiles modules which will help your games load faster.
Related: Are Game Emulators Legal? Everything you Need to Know
More Configurations
RPCS3 supports both digitally-downloaded games in PKG files and disc-based games in either ISO or uncompressed-folder format.
Note: downloading games you don’t own is considered illegal in most countries, and we won’t touch the subject since we don’t condone piracy.
To run a game in PKG format, you need to install it by selecting “File -> install .pkg.” Soon after, it will appear in RPCS3’s game list, from where you will be able to launch it with a double-click.
You can boot disc-based games directly by selecting “Boot Game” and then choosing their ISO or folder. Disc-based games might also need installation, but unlike PKG games, it’s done through the emulated PlayStation 3’s interface.
When booting a game for the first time, RPCS3 will compile some more files it needs to run. The process can be annoying, but thankfully, it only has to be done once per game.
Next, click on “Pads” to configure the emulator’s controls. RPCS3 supports keyboard input, but it’s better if you use an actual PlayStation controller connected to your PC by choosing “DualShock 3” or “DualShock 4” from the “Handlers” pull-down menu on the top left. Xbox and other “XInput” controllers are also supported by choosing the appropriate option from the same spot.
With your controller selected, check out if it’s detected by moving the two thumbsticks while watching their input live in the two circles at the bottom right of the window. Most joypads today have the same button configuration established by the first PlayStation’s DualShock joypad, so you probably won’t have to remap anything.
Lastly, click on your game to start playing.
That’s when you may meet a second problem: each game may need some tweaks in the emulator’s settings: some don’t run well (yet), and others are fully incompatible. In our case, Demon’s Souls was displaying its graphics as shadows.
There are two ways to configure the emulator: by clicking on “Config” or using the entries in the “Configuration” menu, you set up its options globally for all games. Alternatively, you can use per-game configurations by right-clicking on an entry in the game list and choosing “Create Custom Configuration” from the menu that pops up.
You won’t have to try all available options to see if the game works. Instead, pay a visit to the RPCS3 Wiki and search for your game to find the optimal settings.
Create a custom configuration for your selected game and tweak the emulator’s settings as suggested in RPCS3 Wiki’s game entry. Then, click “Save” to make the changes permanent.
Try rerunning your game, and, if it’s compatible, in seconds you’ll start playing as if you were gaming on an actual PS3.
This Is a PC!
Today’s PCs are much more powerful than the PS3, so for compatible games, you can also enable “Anisotropic Filtering” and “Anti-Aliasing” in RPCS3’s GPU settings for smooth game graphics with increased detail. Even better, you can increase the “Resolution Scale” to a number close to your monitor’s resolution to have RPCS3 upscale the emulated game’s graphics.
Note, though, that some games may “break” when the emulator’s settings don’t closely match the capabilities of PlayStation 3’s hardware.
Upgrade Games with Patches
Newer versions of RPCS3 allow you to easily download patches for games through the emulator itself. Those patches may tweak its code to increase compatibility with some games and modernize others to take advantage of our PCs’ increased horsepower. Some fix annoyances, such as removing long and unskippable intro videos.
To use them, first visit RPCS3’s patch management window from “Manage -> Game Patches.”
Initially, RPCS3’s patch list will be empty. Click on the Download latest patches button on the bottom left of the Patch Manager window that appears.
RPCS3 will download all available patches and, after its list is populated with them, will inform you that your patch file is up to date.
You can enable “Only show owned games” on the top center of the window to filter the list to show only the games you have. Alternatively, you can locate a specific title you’re interested in by typing its name in the Filter patches field on the top left of the window.
When you find the patches for a game you want (that is, if any patches exist for it), you can expand its title and enable them by ticking the checkbox on their left.
You can enable multiple patches for multiple games and won’t have to repeat the process in the future. They’ll remain active until you disable them. Thanks to those patches, you can play some of the supported games even better than on an actual PlayStation 3.
Demon’s Souls feels much smoother and responsive on the PC with its “Unlock FPS” patch than it ever did on the PlayStation 3 locked at 30FPS.
RPCS3 has passed the phase of trying to emulate most of the actual hardware, and now its team is squashing bugs, increasing its compatibility, and optimizing its performance, with new releases almost every month.
Even if a game doesn’t work today, it’s worth trying it out again in newer versions of RPCS3 after one or two months.